Thermoplastic–epoxy interactions and their potential applications in joining composite structures – A review

This paper presents a literature survey on the theoretical backgrounds and the past research efforts in relation to the interactions between certain thermoplastics and epoxies, and their applications in polymer blending, epoxy toughening and composite joining. The main objectives are to understand the possible mechanisms of interfacial adhesion between thermoplastic and thermoset polymers, and also to explore the feasible approaches to improve interfacial adhesion for the purposes of joining fibre reinforced polymer (FRP) composite structures by fusion bonding. Further, it is expected that the review would provide some visions to the potential applications of the thermoplastic–thermoset interfacial interactions for the quick assembly of composite structures in cost-effective manufacturing of composite structures, through the uses of the technologies, such as thermoset composite fusion bonding, welding of thermoplastic composites with thermoset composites, and thermoplastic article attachment on thermoset composites.     

Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms

Forming thick, complex shapes with several layers is needed in high technology fields. During forming, defects can occur and have to be taken into account because they can significantly affect the mechanical performance of the part. This experimental study shows that, when working with dry fabric forming, the type and number of defects is a function of the punch geometry, the process parameters, the orientation of the fabric with respect to the punch and the inter-ply friction. Inter-ply friction has a huge effect on the quality of the preform when inter-ply sliding occurs. This inter-ply friction leads to several overhanging yarn shocks that generate high tangential forces, which inhibit the relative sliding of plies. In addition, to reduce the number and amplitude of defects, the layers subjected to severe defects can be placed in the inner position where they are subjected to the compression applied by the upper layers.     

Influence of the tufting yarns on formability of tufted 3-Dimensional composite reinforcement

In aerospace industry, thicker and more complex composite parts are needed. Multilayered reinforcement is largely used as the traditional method. Recently, three-dimensional (3D) fabrics are developed to replace the multilayered reinforcements in certain applications to increase the performance in thickness direction of part, e.g. interlock structure. Currently, the development of tufting technology can be employed to produce the 3D textile composite reinforcements. The tufting parameters, such as tufting density, tufting length and tufting yarn orientations, can be completely controlled by user. In order to improve the understanding of formability of the tufted 3D fabric during manufacturing, the present work analyzes the preforming behaviours of tufted 3D reinforcement in the hemispherical stamping process. Also the preforming behaviours are compared with the samples of the multilayered forming. The experimental data demonstrated the influence of tufting yarns on the material draw-in, interply sliding, and winkling phenomenon during forming. Furthermore, the orientations of tufting yarn affected the forming results, which leaded to misalignment defect in the zone of strong in-plane shear.     

In-situ damage sensing of woven composites using carbon nanotube conductive networks

We report an in situ analysis of the microstructure of woven composites using carbon nanotube (CNT)-based conductive networks. Two types of specimens with stacking sequences of (0/90)_s (on-axis) and (22/85/−85/−22) (off-axis) were manufactured using ultra-high-molecular-weight polyethylene fibers and a CNT-dispersed epoxy matrix via vacuum-assisted resin transfer molding. The changes in the electrical resistance of the woven composites in response to uniaxial loading corresponded to the changes in the gradient of the stress–strain curves, which is indicative of the initiation and accumulation of microscopic cracking and delamination. The electrical resistance of the woven composites increased due to both elongation and microscopic damage; interestingly, however, it decreased beyond a certain strain level. In situ X-ray computed tomography and biaxial loading tests reveal that this transition is due to yarn compaction and Poisson’s contraction, which are manifest in textile composites.     

面向消费类电子产品的自动化生产线成组技术

针对现代消费类电子产品快速更新换代的现状, 介绍了该类产品的自动化生产线成组技术,阐述了通过度量消费类电子产品相似性和派生性特征,对产线进行成组编码的原理,研究产线工位单元的建模方法,描述了建模内容,并通过有无装载板的产线结构,论述了产线成组编码集成的途径和方法.     

Producing fully-lamellar microstructure for wrought beta-gamma TiAl alloys without single α-phase field

Fine-grained fully-lamellar (FL) microstructure is desired for TiAl components to serve as compressor/turbine blades and turbocharger turbine wheels. This study deals with the process and phase transformation to produce FL microstructure for Mo stabilized beta-gamma TiAl alloys without single α-phase field. Unlike the α + γ two-phased TiAl or beta-gamma TiAl with single α-phase field, the wrought multi-phase TiAl–4/6Nb–2Mo–B/Y alloys exhibit special annealing process to obtain FL microstructure. Short-term annealing at temperatures slightly above β-transus is recommended to produce the desired FL microstructure. The related mechanism is to guarantee the sufficient diffusion homogenization of β stabilizers during single β-phase annealing, and further avoid α decomposition by α → γ + β when cooling through α + β + γ phase field. The colony boundary β phase contributes to fine-grained nearly FL microstructure, by retarding the coarsening of the α phase grains.     

Synergistic effect of co-alloying elements on site preferences and elastic properties of Ni3Al: A first-principles study

The site preferences of co-alloying elements (Mo–Ta, Mo–Re, Mo–Cr) in Ni₃Al are studied using first-principles calculations, and the effects of these alloying elements on the elastic properties of Ni₃Al are evaluated by elastic property calculations. The results show that the Mo–Ta, Mo–Re and Mo–Cr atom pairs all prefer Al–Al sites and the spatial neighbor relation of substitution sites almost has no influence on the site preference results. Furthermore, the Young's modulus of Ni₃Al increases much higher by substituting Al–Al sites with co-alloying atoms, among which Mo–Re has the best strengthening effect. The enhanced chemical bondings between alloying atoms and their neighbor host atoms are considered to be the main strengthening mechanism of the alloying elements in Ni₃Al.     

CAN-BUS系统应用一例

CAN-BUS系统自问世以来,已将近30年,当代各品牌车辆纷纷采用,但大部分技术人员对CAN总线系统既熟悉又陌生。经常能听到,但具体操作又显得有些力不从心。本文通过对奇瑞A3品牌轿车CAN总线的巧妙应用,引导大家进一步理解和应用CAN总线。     

Flexural behaviour of RC slabs strengthened with prestressed CFRP strips using different anchorage systems

The Externally Bonded Reinforcement (EBR) technique using Carbon Fiber-Reinforced Polymers (CFRP) has been commonly used to strengthen concrete structures in flexure. The use of prestressed CFRP material offers several advantages well-reported in the literature. Regardless of such as benefits, several studies on different topics are missing. The present work intends to contribute to the knowledge of two commercially available systems that differ on the type of anchorage: (i) the Mechanical Anchorage (MA), and (ii) the Gradient Anchorage (GA). For that purpose, an experimental program was carried out with twelve slabs monotonically tested under displacement control up to failure by using a four-point bending test configuration. The effect of type of anchorage system (MA and GA), prestrain level (0 and 0.4%), width (50 mm and 80 mm) and thickness (1.2 mm and 1.4 mm) of the CFRP laminate, and the surface preparation (grinded and sandblasted) on the flexural response were the main studied parameters. Better performance was observed for the slabs: (i) with prestressed laminates, (ii) for the MA system, and (iii) with sandblasted surface preparation.     

Effects of nonlinear strain components on the buckling response of stiffened shear-deformable composite plates

A detailed investigation of the weight of each non linear term of the Green–Lagrange strain displacement equation is presented, with reference to the buckling of orthotropic, both flat and prismatic, Mindlin plates. Usually in the literature, in buckling analysis only the second order terms related to the out-of-plane displacement are considered. Such heuristic simplification, known as von Kármán hypothesis, starts by the consideration that the buckling mode of a flat plate is described by dominant out-of-plane displacement and disregards the non-linear terms of the Green–Lagrange strain tensor depending on the in plane displacement components, whose role is confined to first order, say pre-critical, deformation. The present paper shows that disregarding the non linear terms related to the in-plane strain–displacement is equivalent to neglect shear induced rotation. In the work, the governing equations are derived using the principle of strain energy minimum and the differential equations solution is gained by using the general Levy-type method. The obtained results show that the von Kármán model overestimates the critical load when, in buckling mode, magnitudes of shear rotation, in-plane and out-of-plane displacements are comparable.